Crane Customized

What to pay attention to when installing the electric chain hoist?
electric chain hoist

First, the installation of the chain electric hoist needs to install the chain box first.

Second, connect the power cord. When connecting the power cord, the power must be turned off beforehand. At the same time, the grounding wire should be well grounded, otherwise the operator may feel the electric shock when touching any part of the chain or hoist.

Third, lubricate the load chain of the electric chain hoist. The degree of lubrication of the chain is an important factor affecting the service life of the load chain. Timely and effectively lubricate the load chain to ensure the effective service life of the load chain.

Fourth, check the arrangement of the chain. For multi-row chain electric hoists, please make sure that the lower hook frame is not turned over. If it is turned over, restore it to its normal state and make sure that the solder joints of the chain are aligned. Do not hang heavy objects on the winding hoist.

Finally, check the working voltage. Since the electric chain hoist is delivered at the user-specified voltage or higher voltage (only for dual voltage), such as 230/380V, please check the wiring and confirm whether it meets the power supply voltage. If not, please refer to the instructions to make corrections to meet the required operating voltage requirements.

Tips: Install the electric chain hoist. If it is operated at an incorrect voltage, the electric chain hoist may be seriously damaged.To prevent this from happening, you must ensure that the wiring meets the requirements of the required power supply.



[email protected]com